042-1 Aztec 30" Refresher Concrete & Terrazzo Restoration System. 

The Aztec Refresher System is a propane-powered, planetary driven, complete system for Stripping, Honing, Polishing and Burnishing polished concrete and terrazzo floors. 

The Aztec Refresher System is a machine engineered with the operator in mind. The Refresher is heavy and rugged enough to handle the aggressive demands of honing and polishing concrete, yet light and mobile enough to be highly maneuverable and smooth running for hours of continuous use.

• PurepowerLPG 600 Series engine with battery key start
• Green certifications: EPA, CARB, LEED, CE
• US green building council LEED IEQ credit 3.4 requirements
• Optional engine meeting Blue Sky standards

The ProScrub Comes Complete with: Propane Tank, Key Start, Centrifugal Clutch, Pad Holders, Scrub Brushes and Catalytic Muffler. 

For available accessories options check the accessories tab.

FEATURES:

• Gimbled head follows floor resulting in consistent gloss 
• Rugged powder-coated US steel frame & body 
• Self-leveling, mechanically sealed drive unit 
• Synchronous positive drive belt with metal synchronous drive pulleys 
• Solid-lube multi-directional bearings with Nylos seals 
• Premium German precision centrifugal clutch 
• Custom catalytic muffler 
• 8 Gallon water tank for wet operations 
• 2” Vacuum port for dry operations 
• 11-gauge tube extra-heavy transport wheel 
• Tool-free steel lug locking quick change heads 
• Compatible w/ 3” puck-style and 10” pad diamonds 
• Green LEED and GS-42 compliant dry with vacuum

The REFRESHER is a propane-powered, planetary driven, complete system for stripping, honing, polishing and burnishing polished concrete and terrazzo floors.

The Refresher is designed for previously polished concrete and terrazzo floors; hone, polish and burnish concrete and terrazzo floors with diamonds and pads. Strip and scrub VCT floors with strip brushes or pads. The Refresher features a gimbaled, synchronous planetary drive, integral water tank and quick change driver heads.

The Aztec Refresher WorkSmartTM System is engineered with the operator in mind. The Refresher is heavy and rugged enough to handle the aggressive demands of honing and polishing concrete floors, yet light and mobile enough to be highly maneuverable and smooth running for hours of continuous use.

The Refresher, with its dust control capability and sealed planetary drive and positive drive synchronous belt, comes with 3 sets of driver heads/brushes: one set of 3 strip brushes for removing old floor finish; one set of 3 Velcro drivers for resin bond, hybrid and ceramic diamonds; and one set of 3 Mighty-Lok drivers for 10” burnishing or diamond pads. Each set of driver heads/brushes is designed with a lug system for “quick-change” mounting and dismounting on the job.

Included Drive Heads:  

• 3 x 10” MalGrit™ Strip Brushes
• 3 x 10” Mighty-Lok® Pad Drive Emission Auto Shutdown 
• 3 x 10” Velcro® Diamond Drivers

Available Options:  

• Emission Auto Shutdown 
• Lanyard Kill Switch

The Refresher Multifunction 4-Step Process

STEP 1: Stripping/Deep Scrubbing Strip or deep scrub the floor to remove VCT floor finish, sealer or deeply ground-in soils. Many polished concrete, terrazzo and marble floors have been coated with VCT floor finish or sealer, reducing their luster and making them higher maintenance.

STEP 2: Honing Hone the floor to remove scratches or sealers using the quick-change Velcro® driver with hybrid diamonds. These diamonds will cut more deeply than resins, but not as deeply as metal diamonds, allowing the scratches or sealers to be removed.
NOTE: Do not use hybrids on marble floors.

STEP 3: Polishing Polish the floor using the Velcro® drivers with resin puck diamonds or the Mighty-Lok® drive with diamond pads.

STEP 4: Burnishing Apply guard and burnish the floor using the Mighty-Lok® head to accept burnishing pads or diamond impregnated pads. Burnish until the floor heats to 90F / 32C.