$100.00 off on orders of $1000.00 or more, Enter Promo Code DEC19SALE at checkout!

X
   To Order Call 800-309-3393
0 Products $0.00
Expert Service. Competitive Price.

62038 17" Polish Brush


62038 17" Polish Brush62038 17" Polish Brush
62036 17" Polish brush 62036
Mouse over to zoom
62038 17" Polish Brush62038 17" Polish Brush
Click or tap to enlarge
Your Price $66.00
GSA
Please Log In to See GSA Price




Product Description

62038 Sanitaire 17" Polish Brush (Union Mix) 

A combination of Tampico and  Palmyra.  Used primarily in hard surface polishing.

Features water and chemical resistant block.

All polishing brushes 13 inches and larger include a shower feed system for improved performance and long life.

 

Sanitaire Brush Application Guide

 
Product / Application Grit Brush Nylon Brush Poly Brush  Polish Brush
Stripping        
Unsealed Concrete x      
Sealed Concrete x      
Terrazo x      
         
General Scrubbin        
         
Heavily Soiled Concret x   x  
Moderate/Lightly Soiled Concrete     x  
Vinyl Tile   x x  
Terrazo   x x  
Ceramic Tile   x x  
Linoleum   x x  
Marble   x    
Raised Disc Rubber Tile   x    
Non Slip Epoxy     x  
Carpet Scrubbing   x    
         
Hard Surface Polishing        
         
Raised Disc Tile     x  
Marble     x  
Linoleum/Vinyl Tyle     x  
         

 

Clutch Plate - Attached to pad driver or brush. Allows pad driver or brush to be attached to floor machine. Acts as locking mechanism. Sanitaire floor machines utilize the universal NP9200 clutch plate.

Pad Driver - Locks on to floor machine utilizing appropriate clutch plate. Holds various polishing pads in place during operation. Pad drivers are sized 1 inch smaller than machine diameter. 

Sandpaper Driver - Locks on to floor machine utilizing appropriate clutch plate. Used to sand surfaces prior to refinishing. 

Shower Feed - Allows water or chemicals to flow through the brush and on to the surface being cleaned. Shower feed holes are available on Sanitaire pad drivers and brushes 13 inches in size and larger .

Brush - Locks on to floor machine utilizing appropriate clutch plate. Used for a wide range of cleaning situations, such as: stripping, polishing, scrubbing heavily soiled concrete floors, marble, terrazzo, stone and non slip epoxy finishes. Nylon brushes are also used for carpet cleaning. Brushes are more costly but provide superior life.

Brushes are sized 2 inches smaller than machine diameter due to the flare of brush fibers. 

The sizes on Sanitaire brushes are machine size. For example: if you have a 17inch floor machine, you need a brush size that is marked 17 inches. A brush that is marked 17 inches is already 2 inches smaller than the 17 inch floor machine. 

Break-in Procedure – Many brushes require a break-in period.

1.     Mount the brush on the floor machine.

2.     Find a rough textured floor surface such as concrete.

3.     Operate the machine on this surface dry for about 15 minutes. This will help set the brush bristles prior to actual use.

4.     Thoroughly rinse the brush after the break-in procedure.

Storage - Remove the brush after use. Hang up to extend life. Clean and rinse brushes thoroughly after each use, especially when chemicals and strippers are used.


Government Orders
Steam Cleaning
NSN Orders
Awards

Shop our Brands









Please Wait... processing